Planet Minis

orange148 · 10-29-2009, 10:28 AM

Also outright selling a 2008 YFZ450 for 5k$, partial trades considered, lightly modded. PM me for more info, getting pics for a local intrest (will post on here too) in the next day or two

i've got a 2007 Chinese crf clone that im considering parting out if i can get enough money for it, or possibly sell whole for the right price. i wil lget pictures in 2-3 hours when i get home. the brand is SUNL (think pepboys). it has a 12/14 set up with drum rears and disk fronts. the engine is a 110cc clone (not sure of mfg, ill try to pinpoint that too.) 4 speed manual (1d3u).

currently looking to sell (Make Offers)
Frontend (forks, triples, bars + throttle. no brakes or wheel yet, maybe later)
Frame and swinger: nothing special on the frame, big bike swinger with shock
Engine: 110cc china clone with unknown hours, starts first kick, fresh oil when i bought the bike, will include CS sprocket (??teeth) and possibly wiring harness with kill switch. will come with shifter and kick starter

i will sepreate the frame from the swinger and shock
i will not part out untill i have solid buyers with decent prices on all 3.
if i dont get buyers, the bike will stay with me
Buyer will pay shipping, and i prefer to ship UPS.

if the three main components get sold, i will part out whats left that i wont be using on my next build.

located in NY 12067

orange148 · 10-29-2009, 01:15 PM

here are the pics. Forks will come as with bar risers, throttle, and clutch assembly also. i was unable to identify the engine manufacturer, but it is definitely stamped for 110cc (107ml)

orange148 · 10-30-2009, 11:03 AM

Bump
go ahead and make offers.
engine
Fork set up
Frame
Swinger + Shock
will sell the bike whole for the right price...

orange148 · 10-31-2009, 01:25 AM

Meh. 330 am bump.

35mastr · 10-31-2009, 01:35 AM

Motor looks to be Loncin. Looks exactly the same as the one in the Ricardo I have sitting in the corner.

I am either going to part mine one day or just scrap it.

Danman2540 · 11-01-2009, 07:45 PM

what are you looking to get for the motor setup?

orange148 · 11-02-2009, 09:56 AM

Quote:

Originally Posted by Danman2540

what are you looking to get for the motor setup?

PM sent

i will also include the front caliper, master cylinder, and lever with the front end setup. i mocked it up to the front end im using on my next build and it doesnt quite lineup. the clamp on the lever is cracked, but i never noticed it unill i pulled it off.

orange148 · 11-02-2009, 10:34 AM

Quote:

Originally Posted by 35mastr

Motor looks to be Loncin. Looks exactly the same as the one in the Ricardo I have sitting in the corner.

I am either going to part mine one day or just scrap it.

parting is my only option (im not gonna scrap it, maybe keep it as spare parts, idk....) but it also has the standard China E22 head on it

Blackwoodz · 11-04-2009, 03:25 PM

Is that a chopper?....

orange148 · 11-04-2009, 11:07 PM

lol it looks like it from the angle i took it. i'll try to get better pics this weekend and closeups if anyone needs some.

10-29-2009, 10:28 AM	#1 (permalink)
orange148 1st Gear Member Join Date: Aug 2009 Location: Upstate, NY Posts: 129	'07 china knockoff (parting out??) Also outright selling a 2008 YFZ450 for 5k$, partial trades considered, lightly modded. PM me for more info, getting pics for a local intrest (will post on here too) in the next day or two i've got a 2007 Chinese crf clone that im considering parting out if i can get enough money for it, or possibly sell whole for the right price. i wil lget pictures in 2-3 hours when i get home. the brand is SUNL (think pepboys). it has a 12/14 set up with drum rears and disk fronts. the engine is a 110cc clone (not sure of mfg, ill try to pinpoint that too.) 4 speed manual (1d3u). currently looking to sell (Make Offers) Frontend (forks, triples, bars + throttle. no brakes or wheel yet, maybe later) Frame and swinger: nothing special on the frame, big bike swinger with shock Engine: 110cc china clone with unknown hours, starts first kick, fresh oil when i bought the bike, will include CS sprocket (??teeth) and possibly wiring harness with kill switch. will come with shifter and kick starter i will sepreate the frame from the swinger and shock i will not part out untill i have solid buyers with decent prices on all 3. if i dont get buyers, the bike will stay with me Buyer will pay shipping, and i prefer to ship UPS. if the three main components get sold, i will part out whats left that i wont be using on my next build. located in NY 12067 Last edited by orange148; 11-04-2009 at 11:08 PM.

10-29-2009, 01:15 PM	#2 (permalink)
orange148 1st Gear Member Join Date: Aug 2009 Location: Upstate, NY Posts: 129	Re: '07 china knockoff (parting out??) here are the pics. Forks will come as with bar risers, throttle, and clutch assembly also. i was unable to identify the engine manufacturer, but it is definitely stamped for 110cc (107ml) Attached Thumbnails

10-30-2009, 11:03 AM	#3 (permalink)
orange148 1st Gear Member Join Date: Aug 2009 Location: Upstate, NY Posts: 129	Re: '07 china knockoff (parting out??) Bump go ahead and make offers. engine Fork set up Frame Swinger + Shock will sell the bike whole for the right price...

10-31-2009, 01:25 AM	#4 (permalink)
orange148 1st Gear Member Join Date: Aug 2009 Location: Upstate, NY Posts: 129	Re: '07 china knockoff (parting out??) Meh. 330 am bump.

10-31-2009, 01:35 AM	#5 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 565 My Mood:	Re: '07 china knockoff (parting out??) Motor looks to be Loncin. Looks exactly the same as the one in the Ricardo I have sitting in the corner. I am either going to part mine one day or just scrap it.

11-01-2009, 07:45 PM	#6 (permalink)
Danman2540 1st Gear Member Join Date: Jan 2007 Location: St Louis MO Posts: 210 My Mood:	Re: '07 china knockoff (parting out??) what are you looking to get for the motor setup?

11-04-2009, 03:25 PM	#9 (permalink)
Blackwoodz 3rd Gear Member Join Date: Aug 2008 Location: SC Michigan Posts: 3,622	Re: '07 china knockoff (parting out??) Is that a chopper?....

11-04-2009, 11:07 PM	#10 (permalink)
orange148 1st Gear Member Join Date: Aug 2009 Location: Upstate, NY Posts: 129	Re: '07 china knockoff (parting out??) lol it looks like it from the angle i took it. i'll try to get better pics this weekend and closeups if anyone needs some.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)