Planet Minis

lilbiss2k · 10-15-2009, 02:45 PM

i just changed oil and did the airbox mod and i noticed when i took the crankcase breather off it had white foam stuff in there it was kinda oily im guessin the oil has water in it? but i just changed the oil. or is the oil foaming up ? idk lookin for a little help. also i dont run my breather to the air box i just run it down to ground. also how much air is saposed to come out of breather ? also im using the bike for stuntin so front wheel off ground most of time dont know i that makes a difference
thanks
scott

96Justin · 10-15-2009, 04:23 PM

when you changed the oil was the old oil milky?

or the only milkyness you found was in that tube?

lilbiss2k · 10-15-2009, 04:49 PM

no oil looked fine black but ok not milky or anytihng no water in it and i pulled my clutch cover to do a kickstarter seal and no water. looked good i there actually. the milky stuff is only in the tube

caseclosed715 · 10-15-2009, 05:52 PM

It's fine nothing to worry about as long as you don't have any white/milky gunk in the actual crankcase when you drain the oil. If you are reving the bike out pretty far it might start spitting a little bit of oil out of the tube.

lilbiss2k · 10-15-2009, 06:13 PM

no doubt thats a relief thanks man appreciate it

10-15-2009, 02:45 PM	#1 (permalink)
lilbiss2k PM Newbie Join Date: Jul 2009 Location: cazenovia NY Posts: 49	crank case breather problem ? i just changed oil and did the airbox mod and i noticed when i took the crankcase breather off it had white foam stuff in there it was kinda oily im guessin the oil has water in it? but i just changed the oil. or is the oil foaming up ? idk lookin for a little help. also i dont run my breather to the air box i just run it down to ground. also how much air is saposed to come out of breather ? also im using the bike for stuntin so front wheel off ground most of time dont know i that makes a difference thanks scott Last edited by lilbiss2k; 10-15-2009 at 04:51 PM.

10-15-2009, 04:23 PM	#2 (permalink)
96Justin 2nd Gear Member Join Date: Jan 2009 Location: Calgary, AB, Canada Posts: 770 My Mood:	Re: crank case breather problem ? when you changed the oil was the old oil milky? or the only milkyness you found was in that tube?

10-15-2009, 04:49 PM	#3 (permalink)
lilbiss2k PM Newbie Join Date: Jul 2009 Location: cazenovia NY Posts: 49	Re: crank case breather problem ? no oil looked fine black but ok not milky or anytihng no water in it and i pulled my clutch cover to do a kickstarter seal and no water. looked good i there actually. the milky stuff is only in the tube

10-15-2009, 05:52 PM	#4 (permalink)
caseclosed715 2nd Gear Member Join Date: May 2009 Location: New Oxford, PA Posts: 335 My Mood:	Re: crank case breather problem ? It's fine nothing to worry about as long as you don't have any white/milky gunk in the actual crankcase when you drain the oil. If you are reving the bike out pretty far it might start spitting a little bit of oil out of the tube.

10-15-2009, 06:13 PM	#5 (permalink)
lilbiss2k PM Newbie Join Date: Jul 2009 Location: cazenovia NY Posts: 49	Re: crank case breather problem ? no doubt thats a relief thanks man appreciate it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)