| |||||||
 |
| | LinkBack | Thread Tools |
10-07-2009, 10:18 AM
| #1 (permalink) |
| 2nd Gear Member  Join Date: Sep 2008 Location: Greensburg, Pa.
Posts: 668
| Trx90 Lighting Coil and Regulator install
Just figured I share my Lights install on my 2001 Trx90. First off to start making 12v, I installed a Moose Stator/Lighting coil, I believe it was 90watt. I then proceeded to install a Piaa 4in ATP Offroad light kit, but needed a good place to mount them. So I installed a DG front bumper/push bar and a set of Piaa Light Mount brackets.
|
|  |
|
10-07-2009, 10:24 AM
| #2 (permalink) |
| 2nd Gear Member Join Date: Sep 2008 Location: Greensburg, Pa.
Posts: 668
| Re: Trx90 Lighting Coil and Regulator install
When I hooked up the lights to the 12v source wire and started the quad, the included relay was clicking violently and the lights were dim at idle, so as I increased the rpm's, the lights got brighter until I revved it to high and blew out both bulbs. At that point I realized I obviously should have had some type of regulator/rectifier installed. Not wanting to deal with the issue of the lights being dim at idle I decided to also install a battery(P/U RTX4L-BS) along with a regulator(Trail Tech 150watt).
Last edited by gbunner; 10-07-2009 at 10:34 AM. Reason: correct |
|
| |
|
| Bookmarks |
| Tags |
| coil, install, lighting, regulator, trx90 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| |
All times are GMT -7. The time now is 03:41 AM.
