CRF Import Wiring Guide

PlanetMinis Forums

CRF Import Wiring Guide

This is a discussion on CRF Import Wiring Guide within the Chinese/Import Minis - General Discussion forums, part of the General Talk category; OK guys, here we go. This is it. No diagrams, no drawings. Just pics. Here, we have the 5 wires coming from the stator Note ...

Page 1 of 3 123 LastLast
Results 1 to 15 of 34
  1. #1
    Senior Member
    This user has no status.
     
    mattv's Avatar

    Join Date
    May 2005
    Location
    Omaha, Nebraska
    Posts
    2,151

    CRF Import Wiring Guide

    OK guys, here we go. This is it. No diagrams, no drawings. Just pics.



    Here, we have the 5 wires coming from the stator









    Note these two wires: (yellow and white)





    We will NOT need these wires. Yellow is for lights and white is for charging a battery.



    Moving on to the KILL SWITCH:





    Your kill switch may ground itself on the bars. The green wire is a ground. Black wire goes to the CDI.



    Moving on to the COIL:







    We have a RED/BLACK wire, and a green wire. Green wire is a ground. Here's one more picture showing the coil. It's a stock china coil from an SSR bike and the red/black and green wires are attached.




  2. #2
    Senior Member
    This user has no status.
     
    mattv's Avatar

    Join Date
    May 2005
    Location
    Omaha, Nebraska
    Posts
    2,151
    alright guys - let's get some more wiring diagrams in here....



    I'll find all I can and get them up. Anything you guys find -- leave links here. I'll fetch the images and get them on my stable server so they don't go anywhere....

  3. #3
    Senior Member
    This user has no status.
     
    JohnnyB's Avatar

    Join Date
    Nov 2003
    Location
    CT
    Posts
    5,826
    I 'm look'n for the GPX schematic if anybody's got it ???

    Thanx !!!
    Just say'n .... Hidden Content

  4. Remove Advertisements
    PlanetMinis.com
    Advertisements
     

  5. #4
    Senior Member
    This user has no status.
     
    CRF#319's Avatar

    Join Date
    Dec 2005
    Location
    Kelowna, BC Canada
    Posts
    506
    I found this one over at dratv.com.



    My Zongshen 120 has six wires out of the stator color-coded like in the diagram.



    Cheers, #319
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	dratv_stator.jpg 
Views:	23016 
Size:	51.6 KB 
ID:	7190  
    '04 CRF150 w/CR85 suspensionHidden Content

    '05 RCM 125SXHidden Content

    Project "stocker" build Hidden Content

  6. #5
    Senior Member
    is brap braappp
     
    xr70racer's Avatar

    Join Date
    Feb 2006
    Location
    Glen Mills, PA
    Posts
    5,410
    Im having a porblem with my wireing for my Lifan 120. I have an xr70 kill switch and have no where to put it. I have to connect it to a green and a black and white wire. I just don't know how to connect them because there is a plastic connector. ALso how do i connect the wires. Just slip it into the other one and maybe tape it??

  7. #6
    Junior Member
    This user has no status.
     
    Andoru's Avatar

    Join Date
    Sep 2006
    Posts
    28
    hey there, i have a green wire coming out of the strator, and also a yellow and black wire coming out of the coil. where do they go? could anyone help me out? thanks!

  8. #7
    Senior Member
    This user has no status.
     
    moto-mac's Avatar

    Join Date
    Nov 2006
    Location
    La Grande,OR
    Posts
    192
    I'm trying to wire in a regulator and lighting for my bike any diagrams or help on that!!!

  9. #8
    Senior Member
    This user has no status.
     
    Kurlon's Avatar

    Join Date
    Feb 2005
    Location
    Southern Maine
    Posts
    8,601
    Regulators usually have one wire (yellow) to accept input from the lighting coil. They have one wire, green or black to go to ground, and a red wire that will be your 12v positive regulated output.

  10. #9
    Senior Member
    This user has no status.
     
    moto-mac's Avatar

    Join Date
    Nov 2006
    Location
    La Grande,OR
    Posts
    192
    is there a way to check the wires coming out of the stator to see for sure which one it is, should I be able to check it with a volt meter, and will it be ac or dc

  11. #10
    TRT
    TRT is offline
    Senior Member
    is chillin in the D
     
    TRT's Avatar

    Join Date
    Nov 2005
    Location
    Earth
    Posts
    2,317
    The whole system is a 12vDC.



    This page should help you figure out any system that you may have:

    http://www.hooperimports.com/showpages.asp?pid=1013



    Troy
    One fine day!

  12. #11
    Senior Member
    This user has no status.
     
    moto-mac's Avatar

    Join Date
    Nov 2006
    Location
    La Grande,OR
    Posts
    192
    I understand that its 12v but I think its ac before the rectifier because straight out of the stator I get ac voltage but no dc voltage. does anybody know the test procedure for the wires at the stator??

  13. #12
    Junior Member
    This user has no status.
     
    Trail Punisher's Avatar

    Join Date
    Nov 2006
    Location
    Harrisburg Ohio
    Posts
    18
    Here is a pic of diagram.

    In China green is ground instead of black.

    Flameout is Kill switch.

    You can ignore the electric start stuff.

    .

    12 volt Chinese engine project involves 2 wires from the engine- usually



    Black/red from engine can also be yellow/red in some cases is power to cdi box-

    usually goes to red/yellow in the harness-leads to CDI box

    Blue/white from engine can also be red/white in some cases and is the cdi trigger/pulse-

    One wire from the CDI box to the Coil (+), Coil (-) goes to ground.

    Black/yellow wire from cdi box harness goes to the coil + which can be black/yellow stripe or black/white stripe .

    This will get a 12 volt engine running.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ZongshenLifan wiring diagram 1.jpg 
Views:	11374 
Size:	154.1 KB 
ID:	8716  

  14. #13
    Senior Member
    This user has no status.
     
    panaman's Avatar

    Join Date
    Nov 2006
    Location
    Columbus, Ohio
    Posts
    317
    ok... i am so puzzled...



    Basically I have a SSR110A-1 it has a yellow wire and a white wire.

    I get AC voltage out of the yellow wire.

    I bought a 3 wire regulator/rectifier from a local shop (its from an artic cat but should still work fine i would think)

    The regulator/rectifier has Yellow, Red, and Black wire.

    I plugged the yellow wire from the reg/rect to the yellow wire on the bike. I hooked the black wire to ground and I only get 3 volts DC out of the red wire instead of 12v



    Do you guys think thta maybe my regulator/rectifier is effed.. or just wrong since its for an artic cat snowmobile?



    oh yeah.. don't know if this will help but the regulator has the following part numbers..

    ARCTIC 0630-105 and 01-154-18

  15. #14
    Senior Member
    This user has no status.
     
    panaman's Avatar

    Join Date
    Nov 2006
    Location
    Columbus, Ohio
    Posts
    317
    this is what my regulator/rectifier looks like




  16. #15
    Senior Member
    This user has no status.
     
    yzf_nick56's Avatar

    Join Date
    Mar 2004
    Location
    Lewisburg PA
    Posts
    1,269
    Quote Originally Posted by moto-mac
    I understand that its 12v but I think its ac before the rectifier because straight out of the stator I get ac voltage but no dc voltage. does anybody know the test procedure for the wires at the stator??


    I was finding the same thing out last night. do regulators have rectifiers built into them?

Page 1 of 3 123 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

5 wire blue/white black/red green 2 yellow stator

,

5 wire stator diagram

,

72cm3 2 1 wiring

,

honda cd 70 4 pin rectifier 110cc wire yellows and white and green and ground state wire open

,

how to wire motorcycle regulator with 5 wires

,

loncin 125 wiring diagram

,

loncin 125cc wire diagram

,

pit bike wiring diagram

,

ssr 125 12v coil

,

where does green wire go on lifan 125cc stator plate

,

wiring diagram 4stroke pit bike 110 cc db10

,

zongshen rectifier 6 pin 3yellow 1green 1red 1black wiring diagram

Click on a term to search for related topics.

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Sponsored Links

Powered by vBadvanced CMPS v4.3.0