boggin issue

[50rider313]

i have a crf50 wit a crf70 motor my issue is as soon as u get on the throtle a little it bogs down then is fine after i cleaned carb new spark plug and air filter just wonder what can i do to fit it also i had a lose ground i tighted that and now my killswitch dont work now i have to pull the spark plug wire to **** the bike off thanks for any help one more thing was can i run the bbr single swingarm on the stock fifty frame im new to the forums and loving them

[PlanetMinis.com]

[LongMooie]

first try needle clip possition depending on the motor spec and carb you might need to rejet your carb

stock motor and carb should be just the needle clip

check your wiring is correct

and lastly the BBR swingarm will fit but the shock wont you would need the super pro or primmy elka shock and fabricate a new shock mount

in my opinion stock frames are junk wait and buy a better frame

[50rider313]

thanks for the help but i have no idea how to reset that clip it looks confusing lol

[LongMooie]

thanks for the help but i have no idea how to reset that clip it looks confusing lol

ok its pretty easy, some US 50 carbs dont have the adjustment

unscrew the top cap off the carb and pull off, the cable is hooked onto the grey cylinder part that goes inside the carb body (not sure what that part is called) pull the spring back and theres a clip that you need to hook out dont loose it they tend to ping out so be careful

you should now be able to slide the cable out and the needle will now come out too, notice there clip and the grooves this is the needle jet and for fine tuning you can get rid of the low to mid bogging

if its still bogging after you have tried all the possitions you will need to get a pilot jet smaller or bigger depending on motor spec and air temp etc

hope this helps

[50rider313]

thanks for the help im going to go try and mess wit it tonight te weather freezing here in ct so ill stay in and play with it that was a big help im new to this whole fifty thing but starting to really love it ill let u know how i make out and how it works thanks so much again