Bbr Perimeter 50 - Winter Build

[LongMooie]

BBR made a number plate bracket but it was sold with the SP5 fork kit so it might only work with there SP5 top clamp

im sure you could make a bracket to bolt on to the top clamp and hang down, you would still need the washer and bolt though same as the bbr mounted but that way you would be able to move it down to the fender, ive seen people use the CRF70 plates but in my opinion they look too big for the 50s

[PlanetMinis.com]

[KlxRacer#2]

^ ok i havent called larry yet and asked him , i do have a bracket they made for the e6s but its not the same for the zokes , also i have a joker throttle i was gonna use but the chp throttle cable i have is to short and the throttle cable is to tight which opens the carb up a little. does anyone sell cables for the jokers ?

[squidwell]

What about contacting Joker Machine? Motion Pro is another option.

[KlxRacer#2]

^ ok i will check on both , i also had alot of trouble trying to get everything to fit under the tank , seems like everything is cramped in one area like the electrical and filter

[squidwell]

What filter r u using...I have a UNI angled filter on mine and the fitment between the spars and away from the header is perfect, try to mount rev box as far forward as possible to avoid your current problem...I have mine mounted to the left hand spar just in front of the carb, it can be tight in there but it all should fit without issues.

[50WHIP]

drop those forks about an 1" in your clamps untill the motor sets level, works best with the skid plate mounted.

[LongMooie]

drop those forks about an 1" in your clamps untill the motor sets level, works best with the skid plate mounted.

and a 10" front wheel

[Lane 22]

You done a Nice job dude

[KlxRacer#2]

thanks guys , im running some sort of uni filter that actually looks just like the one on my bbr u flow , 50whip u think my front end sits high ? i took the bike for the first ride last night and it rode pretty good , not crazy fast but smooth and controllable power , also handled awesome

[cr771]

look's awesome! lovin them wheels for sure =)

[50WHIP]

If it seems ok go with it, I just double checked mine and I'm running about 1/2" up out of the clamps. I've had it setup like that since I built the bike.

[halohaulic]

Where did you get those graphics made at? They look awesome! Not to mention the bike

[stevos50nuts]

50's look so fun....i built a sick 50 but was way too sketchy for me to ride. Yours looks awesome.

[KlxRacer#2]

graphics= magiks ! , thanks guys and i will get some updated pics tmmrw out in the light with a good camera

[KlxRacer#2]

finally got the camera out and snapped some finished pics !

[KlxRacer#2]

waiting on my fork guard graphics and front plate bracket

[LongMooie]

get this thing dirty already

[Rockstar127]

get this thing dirty already

Haha he took it out last thursday to an indoor track hit triple the bars went down then he stuck the throttle and cartwheeled over the berm was pretty swt!

[Rankin141]

Haha he took it out last thursday to an indoor track hit triple the bars went down then he stuck the throttle and cartwheeled over the berm was pretty swt!

At least this didn't happen to him.

[cr771]

At least this didn't happen to him.



http://www.youtube.c...feature=related

o.m.g. lol i wonder what made it do that