108 stroker race head question

[pjz400]

I have a takegawa race head from an 88cc, could I potentially put that on a 108 tb stroker and see a performance gain?

[PlanetMinis.com]

[RcWannabe]

What takegawa head?

[pjz400]

takegawa race head for an old R-stage kit...

[moto234]

as long as you have the piston or can get one for that head i would imagine you can use it. but maybe not because of the stroke, not sure tho

[Brent878]

I stroked out a BBR 82cc kit with a TB stroker crank. Just kept the top end the same and put the stroker crank in. You are probalby going to have to change the carb, oil pump, clutch and maybe oil cooler. I kept the stock clutch in and it died the first day. After the first day i could barely start the bike. Put in a HD clutch and its been fine since. When you put in the strocker crank check the clearance at TDC to make sure it clears the head and valves.

[pjz400]

Yep, the 108 has everything already on it(HD clutch, 24mm carb, oil cooler, and HV oil pump). It just has a stock head, so I was going to replace the stock head on the 108 with the race head from my 88