plz help me!

[aaron33_dg@f]

somke is comeing out of my crank case vent i put new rings in it and it still smokes...

do you think my exhaust valve is bent

its on a tb 88 kit with a stock head

thanks for your help

[PlanetMinis.com]

[realgraverobber]

Did you use Non-Detergent engine oil after changing the rings? Did you hone, bore, or otherwise break the glaze on your cylinder before reassembly? Did you do a proper break in?



Most people don't know to use Non-Detergent Oil after a rebuild, but you should. If you use normal, or synthetic oil your rings and piston will not 'cut into' your cylinder walls properly to wear and match to each other. A lot of rebuilds never stop smoking due to this.



The smoking from a recent top end job should clear up as time builds on the engine. If it doesn't, that sucks.

[realgraverobber]

P.S. You should be embarrassed if you knowingly ran a bent exhaust valve. Lucky your engine is not in pieces from breaking/dropping the valve into your cyl.

[aaron33_dg@f]

no i used honda 10w 40

[Twister773]

derrr

[Twister773]

run it like a true dgafer lol

[wayfastwhitey]

try the stock head i guess

[aaron33_dg@f]

run it like a true dgafer lol

its not my bike its a friends friend

[aaron33_dg@f]

try the stock head i guess

ill throw it on tomaro when i get da bike

[wayfastwhitey]

wassup with the 124 is it fixed

[aaron33_dg@f]

wassup with the 124 is it fixed

my primeter?

ya i got a new kick starter to day

the bike rips!

[wayfastwhitey]

come to glen helen on sunday

[aaron33_dg@f]

come to glen helen on sunday

ill try