PlanetMinis Forums banner

Lifan 125 mods? v. noob

13K views 8 replies 4 participants last post by  fazle 
#1 ·
Alright, so I have a Lifan 125, and of course, I want to mod it.



I have a Pro Circuit T4 on the way, and I want to get some more top end power and some more over-rev. I know that a cam is the answer, but which one? I found one that looks like it might work, a Hot Cams Stage 2. Will this be a step up?



My concern is that most parts are designed for 50 and 88cc engines, not chinese 125's.

Any help would be greatly appreciated.
 
#7 ·
fazle said:
Well, I'm limited to 125cc's, so going bigger is out. As for the head, clutch, etc. I have no idea. The trans is 1d3u. Are there any identifying marks I should be looking for?
no no the carb, the carb is to small you need a bigger carb to let more air in the combustion chamber other wise your wasting money on a cam casue you can't feed it enough gas and air, i have made this mistake my self.
 
#9 ·
cdoublejj said:
no no the carb, the carb is to small you need a bigger carb to let more air in the combustion chamber other wise your wasting money on a cam casue you can't feed it enough gas and air, i have made this mistake my self.


Got what you were saying, Chaddy said something about a 160 bbk.

I already put a bigger carb on it, a $40 ebay special, but it helped soo much, but it's still chinese crapperware. I was looking @ a 28mm Mikuni, but $300+ is a bit steep right now. FML
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top