Kx65 Sprocket Clearance
This is a discussion on Kx65 Sprocket Clearance within the Sik Tendencies forums, part of the PM Supporting Vendors category; hi guys i've got your kx65 rear brake kit on my bbr klx, the brake and wheel are mounted fine but it looks as though ...
-
hi guys i've got your kx65 rear brake kit on my bbr klx, the brake and wheel are mounted fine but it looks as though the sprocket and chain aren't going to clear the chain guide? even with the wheel adjusted all the way forward and back on the blocks... obviously the stock kx sprocket is far too big but there isn't much room for anything else, been told a 39t will clear but can you advise please?
-
01-13-2012 12:42 PM
-
You can go as low as a 38 sprocket and we actually run a 44 tooth rear sprocket on our race bikes with the Sano 3 piece billet swingarm. Talon has as low as a 41 tooth sprocket; http://www.talon-eng.co.uk/products....how=&bike=1221 ,,, also Vortex, PBI, Rocket sprockets all will have the 39 tooth sprockets and higher.
NOTE: If you are wanting to run the bigger sprockets we have in the past made an adapter spacer that moves the chain guide up so that it doesn't get in the way of the bigger sprocket. We ran a 46 tooth before.
-
thanks guys, going to call talon monday morning. don't suppose you have any of the adapter spacers for sale at all?
cheers
-

Originally Posted by
chris140
thanks guys, going to call talon monday morning. don't suppose you have any of the adapter spacers for sale at all?
cheers
each swingarm would be different due to the bolt patterns being different. You just have to take some aluminum or steel and fabricate a one off piece. 
NOTE: I run a 44 tooth on all our race bikes (12 bike) and with the Sano 3 piece billet swingarm and chain guide need no modification.
-
ok will wait for the sprocket to arrive and see how we go. there's another lad over here with the same set up that says he runs down to a 39t with no problem
thanks again
-
Hi...
I normally don't really interrupt the discussion where I am not needed to say anything but I really liked the way you people assist others. this is remarkable and really appreciated one...
-
I run a 44t on my BBR with the the str adapter no modifications or anything works perfect
-
39t talon and it all clears a treat
just need to ride her now lol
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search tags for this page
11 tooth sprocket for kx 65
,
2008 klx 65 rear sprocket teeth stock
,
kx 65 sprockets
,
kx 65 stock sprocket size
,
kx65 36 rear sprocket
,
kx65 forum chain sprocket
,
kx65 sprocket
,
kx65 sprocket size
,
kx65 sprockets
,
kx65 stock sprocket sizes
,
sprockets for kx 65
,
what are the stock sprockets for a 2008 kx65
Click on a term to search for related topics.