Dual Piston Brakes - Bolt up and go on Marzocchi Fork Legs!

PlanetMinis Forums

Dual Piston Brakes - Bolt up and go on Marzocchi Fork Legs!

This is a discussion on Dual Piston Brakes - Bolt up and go on Marzocchi Fork Legs! within the Wholesale-Cycle forums, part of the PM Supporting Vendors category; Have them back in stock and ready to ship , direct bolt on and ride to the marzocchi fork legs! Dont worry about the little ...

Page 1 of 2 12 LastLast
Results 1 to 15 of 28
Like Tree2Likes

Thread: Dual Piston Brakes - Bolt up and go on Marzocchi Fork Legs!

  1. #1
    Senior Member
    is ready for outdoors!
     
    www.wholesale-cycle.com's Avatar

    Join Date
    Aug 2012
    Location
    Akron, Ohio USA
    Posts
    927

    Dual Piston Brakes - Bolt up and go on Marzocchi Fork Legs!

    Have them back in stock and ready to ship , direct bolt on and ride to the marzocchi fork legs! Dont worry about the little formula brakes or trouble bleeding, upgrade to the dual piston brakes with no issues! We are running a 220mm rotor with this setup.

    Click image for larger version. 

Name:	8054132768952451329_1.jpg 
Views:	1167 
Size:	49.2 KB 
ID:	109779



    Hidden Content - We've got it in stock!
    The worlds largest source for Pit Bikes, Engines, Parts, and the maker of Piranha Pit Bikes.

    Hidden Content - Hidden Content - Hidden Content - 330-434-7777

    Hidden Content

  2. #2
    Senior Member
    This user has no status.
     
    Johner@Pax Racing's Avatar

    Join Date
    Feb 2011
    Location
    CA, 93543
    Posts
    704
    I used thoses brake for along time and they work very well.
    KlxRacer#2 likes this.

  3. #3
    Senior Member
    This user has no status.
     
    Bean573's Avatar

    Join Date
    Jul 2011
    Location
    Australia
    Posts
    850
    Is there a 220mm disk that will fit a marzocchi hub for this setup?

  4. Remove Advertisements
    PlanetMinis.com
    Advertisements
     

  5. #4
    Senior Member
    This user has no status.
     
    shoehorse33's Avatar

    Join Date
    Jan 2007
    Location
    Phoenix, AZ
    Posts
    1,149
    Will this setup work for anything other than Zokes?
    Say a Red Baron front end possibly?
    Red Baron Racing FMF Racing EVS-Sports Moto-Gate A-1 Autos Inc

  6. #5
    Senior Member
    is ready for outdoors!
     
    www.wholesale-cycle.com's Avatar

    Join Date
    Aug 2012
    Location
    Akron, Ohio USA
    Posts
    927
    Quote Originally Posted by Bean573 View Post
    Is there a 220mm disk that will fit a marzocchi hub for this setup?
    We have front rotors but they are not the same bolt pattern as the marzocchi wheel , u may have to run our wheel or try to get ahold of a galfer rotor.
    I will have Justin bring home a set and play around with his marzocchi wheel and see what he can find out.

    *Bean what mm rotor comes stock on that formula rotor ?
    Last edited by www.wholesale-cycle.com; 03-07-2013 at 09:17 AM.
    Hidden Content - We've got it in stock!
    The worlds largest source for Pit Bikes, Engines, Parts, and the maker of Piranha Pit Bikes.

    Hidden Content - Hidden Content - Hidden Content - 330-434-7777

    Hidden Content

  7. #6
    Senior Member
    is ready for outdoors!
     
    www.wholesale-cycle.com's Avatar

    Join Date
    Aug 2012
    Location
    Akron, Ohio USA
    Posts
    927
    Quote Originally Posted by shoehorse33 View Post
    Will this setup work for anything other than Zokes?
    Say a Red Baron front end possibly?
    We havent done any testing with the red baron front end , just the fastace and the marzocchis we run. If you can give me some measurements i can let you know
    Hidden Content - We've got it in stock!
    The worlds largest source for Pit Bikes, Engines, Parts, and the maker of Piranha Pit Bikes.

    Hidden Content - Hidden Content - Hidden Content - 330-434-7777

    Hidden Content

  8. #7
    Senior Member
    This user has no status.
     
    shoehorse33's Avatar

    Join Date
    Jan 2007
    Location
    Phoenix, AZ
    Posts
    1,149
    Quote Originally Posted by www.wholesale-cycle.com View Post

    We havent done any testing with the red baron front end , just the fastace and the marzocchis we run. If you can give me some measurements i can let you know
    What measurements do you need and I will get them for you?
    Thanks.
    Red Baron Racing FMF Racing EVS-Sports Moto-Gate A-1 Autos Inc

  9. #8
    Senior Member
    is ready for outdoors!
     
    www.wholesale-cycle.com's Avatar

    Join Date
    Aug 2012
    Location
    Akron, Ohio USA
    Posts
    927
    Let me know from bolt hole to bolt hole on the fork leg where the brake bolts on
    Hidden Content - We've got it in stock!
    The worlds largest source for Pit Bikes, Engines, Parts, and the maker of Piranha Pit Bikes.

    Hidden Content - Hidden Content - Hidden Content - 330-434-7777

    Hidden Content

  10. #9
    Senior Member
    This user has no status.
     
    shoehorse33's Avatar

    Join Date
    Jan 2007
    Location
    Phoenix, AZ
    Posts
    1,149
    Quote Originally Posted by www.wholesale-cycle.com View Post
    Let me know from bolt hole to bolt hole on the fork leg where the brake bolts on
    Ok will do.
    Red Baron Racing FMF Racing EVS-Sports Moto-Gate A-1 Autos Inc

  11. #10
    Senior Member
    is living the american dream!
     
    KlxRacer#2's Avatar

    Join Date
    May 2010
    Location
    we scrub harder in Ohio!
    Posts
    8,246
    here are the brakes being used on johner's old bigminis bike with a formula rotor.


  12. #11
    Senior Member
    This user has no status.
     
    Johner@Pax Racing's Avatar

    Join Date
    Feb 2011
    Location
    CA, 93543
    Posts
    704
    Quote Originally Posted by KlxRacer#2 View Post
    here are the brakes being used on johner's old bigminis bike with a formula rotor.
    I used them with formula 200mm rotor but I have also use with the Hayes 180mm rotor because it is 5 mm thick compared to the formula 200mm that is only 2.5mm thick. Works well with either rotor. If your able to find a BBR waver rotor then it will even be better because it is 5mm thick and 200mm rotor size. Either way brakes are good and ASV makes a lever for it too
    KlxRacer#2 likes this.

  13. #12
    Banned
    This user has no status.
     
    starfish895's Avatar

    Join Date
    Nov 2012
    Location
    la mirada california
    Posts
    598
    Price?

  14. #13
    Senior Member
    is Took Portland's job. I may be
    getting demoted again...
     
    Jarret53's Avatar

    Join Date
    Aug 2009
    Location
    Massachusetts
    Posts
    3,905
    Just click on the first picture and it brings you right to the site with the part

    front brake assy


    Complete Brake Systems
    (Item no: 2075)

    Our Price: $66.89

  15. #14
    Senior Member
    This user has no status.
     
    shoehorse33's Avatar

    Join Date
    Jan 2007
    Location
    Phoenix, AZ
    Posts
    1,149
    Quote Originally Posted by www.wholesale-cycle.com View Post
    Let me know from bolt hole to bolt hole on the fork leg where the brake bolts on
    Hope I measured correctly. Let me know if I did this wrong.
    On the fork leg the holes were 15.0mm apart.


    Click image for larger version. 

Name:	image-1367678993.jpg 
Views:	145 
Size:	97.1 KB 
ID:	109908

    Measured the caliper mount too just in case it might help.


    Click image for larger version. 

Name:	image-3887100668.png 
Views:	140 
Size:	1.77 MB 
ID:	109909
    Red Baron Racing FMF Racing EVS-Sports Moto-Gate A-1 Autos Inc

  16. #15
    Senior Member
    This user has no status.
     
    Johner@Pax Racing's Avatar

    Join Date
    Feb 2011
    Location
    CA, 93543
    Posts
    704
    Quote Originally Posted by shoehorse33 View Post

    Hope I measured correctly. Let me know if I did this wrong.
    On the fork leg the holes were 15.0mm apart.

    <img src="http://planetminis.com/forums/attachment.php?attachmentid=109908"/>

    Measured the caliper mount too just in case it might help.

    <img src="http://planetminis.com/forums/attachment.php?attachmentid=109909"/>
    Best way to get the correct measurement is to use the back side of the calipers and measure inside to inside of one hole then leave that measurement where it is and zero it out. From there measure from hole to hole all the way to the end. When you measure just the hole then zero it out and measure it end to end it's real acting as you measuring it from the middle of each hole. Hope it make since but what you sent will get them close enough to see I am sure.

Page 1 of 2 12 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Marzocchi fork legs
    By minirider54 in forum Feelers and What is my bike/parts worth?
    Replies: 2
    Last Post: 02-09-2009, 05:56 AM
  2. marzocchi fork legs
    By MATT 566 in forum KLX110/Midsize Parts for Sale
    Replies: 20
    Last Post: 01-21-2009, 06:14 PM
  3. KLX110 Marzocchi fork legs New Style Dual Comp and Reb
    By siktendenciesracing in forum KLX110/Midsize Parts for Sale
    Replies: 16
    Last Post: 01-09-2009, 11:07 AM
  4. Dual Piston Brake Setup For Marzocchi 35 Shivers
    By p3racer in forum CRF50/CRF70 Parts For Sale
    Replies: 10
    Last Post: 06-04-2007, 09:21 PM
  5. Wanted: Graphics, fork legs, disk brakes....
    By quadracer04 in forum CRF50/CRF70 Parts For Sale
    Replies: 0
    Last Post: 01-15-2006, 03:57 AM

Search tags for this page

2014 klx110l marzocchi fork
,

bbr 220mm brake

,
brake setups on marzocchi forks
,
crf50 220mm rotor
,
ktm 50 front forks mod
,
marzocchi brake set ups
,
marzocchi forks 200mm front brake
,
marzocchi hub
,
marzocchi klx110 forks
,
old style marzocchi forks klx110
,
what front brake do you use on klx 110 marzocchi forks
,
wholesale cycle marzocchi brake
Click on a term to search for related topics.

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Sponsored Links

Powered by vBadvanced CMPS v4.3.0