LinkBack URL
About LinkBacksWell i know my bike was good, but i sold my forks and i will be putting on bombshells this week or next week, but sense i have down time i started sprusing it up like some paint and polishing etc. I will also be getting my supermoto tires soon, and then i need to get another set of hubs so i can just swap wheel sets for street and dirt. Will be running 12/10 dirt, and 10/10 street. I havent decided if i want to use my stock rims or just cheap chink rims either way they dont need to be great because they will only be used for street. I am also making a oil catch tank tomarrow and will post progress pics. I still have to mount my choke on the bars, make an oil catch tank, finish exhaust tip, polish all aluminium, new kill switch, finish swingarm, shave the seat, and once finished up set the ride height. Here are the pics (dont mind the breather tube attached to the crank breather, just had it there to keep it out of the way) Give me feedback on what you think i should do or change etc, and crf fender is on the list but not on the top lol.
Ben
I will update again once i get the rear end back together, then when getting the forks on...
progress pics
This is a discussion on progress pics within the Yamaha TTR50 forums, part of the General Talk category; Well i know my bike was good, but i sold my forks and i will be putting on bombshells this week or next week, but ...
Results 1 to 17 of 17
Thread: progress pics
-
05-16-2006, 07:50 PM #1Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Shelter Island NY
- Posts
- 1,346
progress pics
06 TTR50-GYTR Bar Kit, GYTR Skid, GYTR Filter, GYTR Graphics, GYTR Jet Kit, CHM Pipe, Sano Bombshell LT6's, Staggs Works Mono Shock, 10in BBR rear 12in BBR front, Shinko Rear/Starcross Front, Head Breather, GYTR Tall Seat, TBR Shifter, Thumpstar Swingarm, CRF Number plate, Scott MX Grips, Staggs Shock Mount Adaptor(modified), DID Gold Chain, Blue Chain Guide, GYTR Kick Start Kit, GYTR Blue Pegs, GYTR Billet Brake Pedal, Five-O Throttle, Gustav Disk Front, Cable Rear Brake, Catch Can
-
05-16-2006 07:50 PM
-
05-16-2006, 08:01 PM #2Senior Member
This user has no status.
- Join Date
- Dec 2004
- Posts
- 3,966
Woah!! I love the blue theme!! Looks like my motard!
Sanoman23
Coping my idea of a blue motard???! I copyrighted it so be careful!
-
05-16-2006, 08:05 PM #3Senior Member
This user has no status.
- Join Date
- Oct 2004
- Posts
- 337
that shock spring looks real sharp. take pics when your done.
-
05-16-2006, 08:11 PM #4Senior Member
This user has no status.
- Join Date
- Jun 2005
- Location
- Holland, Michigan
- Posts
- 2,035
Lookin good, cant wait to see it finished!
-
05-16-2006, 08:24 PM #5Senior Member
This user has no status.
- Join Date
- May 2005
- Location
- Texarkana
- Posts
- 1,789
Originally Posted by sanoman23
well his is a ttr...so he kinda has to go blue.......
T-RAV[quote name='anyonebut_24']Easy Money= Picking a trade while in high school, building experience while moving up the ranks, starting your own business and watching it take off while the money rolls in.
Bigshot= The guy that follows the above formula and gives you your minimum wage job sweeping the floors that he owns.[/QUOTE]
-
05-16-2006, 08:33 PM #6Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Stratham, NH
- Posts
- 404
"havent decided if i want to use my stock rims or just cheap chink rims either way they dont need to be great because they will only be used for street"
it does make a diffrence because cheep chink rims are almost never true and its not the most fun thing when you come into a corner 3rd pined and your wheel has a hop even slight hop, it gets sketchy. i know from experience thats its not fun. its dirt that doesnt matter if your rims are perfectly true.TTR50, two brothers pro bar kit, HD springs front and back (.25" spacer), tall seat, Classic honda +2.5 swing arm, HD foot pegs, jet kit, air filter, tires(sudded,dirt,motard), custon front fender, blue hubs and black rims...etc
http://profile.myspace.com/index.cfm...endid=76229132
-
05-16-2006, 09:08 PM #7Senior Member
This user has no status.
- Join Date
- Jan 2006
- Location
- King Salmon, AK
- Posts
- 718
lookin good ben. cant wait to see it with the new forks and stuff
-
05-17-2006, 03:35 AM #8Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Shelter Island NY
- Posts
- 1,346
thanks guys, and i am talkign about the cheap sik50 wheels, i had them before and got them to true up perfect with a little time and patience, but yeah i under stand they need to be true for the road. I cant wait to finish it up and take it for a ride...
Ben06 TTR50-GYTR Bar Kit, GYTR Skid, GYTR Filter, GYTR Graphics, GYTR Jet Kit, CHM Pipe, Sano Bombshell LT6's, Staggs Works Mono Shock, 10in BBR rear 12in BBR front, Shinko Rear/Starcross Front, Head Breather, GYTR Tall Seat, TBR Shifter, Thumpstar Swingarm, CRF Number plate, Scott MX Grips, Staggs Shock Mount Adaptor(modified), DID Gold Chain, Blue Chain Guide, GYTR Kick Start Kit, GYTR Blue Pegs, GYTR Billet Brake Pedal, Five-O Throttle, Gustav Disk Front, Cable Rear Brake, Catch Can
-
05-17-2006, 07:19 AM #9Member
This user has no status.
- Join Date
- Apr 2006
- Posts
- 48
"chink rims" HUH...?
-
05-17-2006, 02:54 PM #10Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Shelter Island NY
- Posts
- 1,346
chinese rims lol, you must have known what i ment and if you took offence to it sorry.
Ben06 TTR50-GYTR Bar Kit, GYTR Skid, GYTR Filter, GYTR Graphics, GYTR Jet Kit, CHM Pipe, Sano Bombshell LT6's, Staggs Works Mono Shock, 10in BBR rear 12in BBR front, Shinko Rear/Starcross Front, Head Breather, GYTR Tall Seat, TBR Shifter, Thumpstar Swingarm, CRF Number plate, Scott MX Grips, Staggs Shock Mount Adaptor(modified), DID Gold Chain, Blue Chain Guide, GYTR Kick Start Kit, GYTR Blue Pegs, GYTR Billet Brake Pedal, Five-O Throttle, Gustav Disk Front, Cable Rear Brake, Catch Can
-
05-18-2006, 05:21 PM #11Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Shelter Island NY
- Posts
- 1,346
update!!!
Update, i should have forks in and on by next week, i will take some pics of the stems differences and once i press in the new one. Then i have to paint the clamps blue insted of red, and maybe if i am feeling like disassembleing the wheel to paint the hub i will. Also have to fab up the bar mounted choke and new kill switch, then i think its ride time until i get my 104se....
Pic of whats there (forks maybe next week!)
Rear end (fresh paint, and centered off the wheel)
Heres my breather and oil overflow setup (want to add fuel overflow to it also eventually)
Breather overflow and finished exhaust tip (removed blue to give a little more silver to the bike and bent my subframe back...oopps...lol)
06 TTR50-GYTR Bar Kit, GYTR Skid, GYTR Filter, GYTR Graphics, GYTR Jet Kit, CHM Pipe, Sano Bombshell LT6's, Staggs Works Mono Shock, 10in BBR rear 12in BBR front, Shinko Rear/Starcross Front, Head Breather, GYTR Tall Seat, TBR Shifter, Thumpstar Swingarm, CRF Number plate, Scott MX Grips, Staggs Shock Mount Adaptor(modified), DID Gold Chain, Blue Chain Guide, GYTR Kick Start Kit, GYTR Blue Pegs, GYTR Billet Brake Pedal, Five-O Throttle, Gustav Disk Front, Cable Rear Brake, Catch Can
-
05-18-2006, 05:23 PM #12Senior Member
This user has no status.
- Join Date
- Sep 2004
- Location
- Upland, Ca, CPP
- Posts
- 10,008
why do you have a brake pedal? it looks like you have a hand brake mount there
-
05-18-2006, 05:23 PM #13Member
This user has no status.
- Join Date
- Jul 2005
- Location
- ARIZONA
- Posts
- 86
lookin' good!
TWO 05 CRF 50īS, 03 XR 50, 04 636, 01 400EX!
-
05-18-2006, 05:27 PM #14Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Shelter Island NY
- Posts
- 1,346
thanks, and i have a brake pedal to stop lol i have cable rear brake......
06 TTR50-GYTR Bar Kit, GYTR Skid, GYTR Filter, GYTR Graphics, GYTR Jet Kit, CHM Pipe, Sano Bombshell LT6's, Staggs Works Mono Shock, 10in BBR rear 12in BBR front, Shinko Rear/Starcross Front, Head Breather, GYTR Tall Seat, TBR Shifter, Thumpstar Swingarm, CRF Number plate, Scott MX Grips, Staggs Shock Mount Adaptor(modified), DID Gold Chain, Blue Chain Guide, GYTR Kick Start Kit, GYTR Blue Pegs, GYTR Billet Brake Pedal, Five-O Throttle, Gustav Disk Front, Cable Rear Brake, Catch Can
-
05-18-2006, 05:58 PM #15Senior Member
This user has no status.
- Join Date
- Jun 2005
- Location
- Holland, Michigan
- Posts
- 2,035
Once again lookin good, cant wait to see it with the forks on!
-
05-18-2006, 06:07 PM #16Senior Member
This user has no status.
- Join Date
- May 2005
- Location
- Texarkana
- Posts
- 1,789
nice bike man once again, i think its gonna turn out being one pimp ttr
T-RAV[quote name='anyonebut_24']Easy Money= Picking a trade while in high school, building experience while moving up the ranks, starting your own business and watching it take off while the money rolls in.
Bigshot= The guy that follows the above formula and gives you your minimum wage job sweeping the floors that he owns.[/QUOTE]
-
05-20-2006, 04:21 PM #17Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Shelter Island NY
- Posts
- 1,346
well, got my stem today, but this week i should have forks and then i should be done, i am so stoked, i really want to ride but i could not have picked a better time to work on my bike due to it raining the past 2 weeks and on/off rain still...
Ben06 TTR50-GYTR Bar Kit, GYTR Skid, GYTR Filter, GYTR Graphics, GYTR Jet Kit, CHM Pipe, Sano Bombshell LT6's, Staggs Works Mono Shock, 10in BBR rear 12in BBR front, Shinko Rear/Starcross Front, Head Breather, GYTR Tall Seat, TBR Shifter, Thumpstar Swingarm, CRF Number plate, Scott MX Grips, Staggs Shock Mount Adaptor(modified), DID Gold Chain, Blue Chain Guide, GYTR Kick Start Kit, GYTR Blue Pegs, GYTR Billet Brake Pedal, Five-O Throttle, Gustav Disk Front, Cable Rear Brake, Catch Can
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
