LinkBack URL
About LinkBacksok how is eavryones holdin up mines fine except i bent my subframe about 4 inches higher up on the left than the right side but the frame has been holding it suprisingly out lasted my stock fork legs because mine are bent foreward so bad now that the forks dont work anymore.
has anyone chopperd a yami frame yet? and how is the rb frame?
just curieous
yamaha frames choppered???
This is a discussion on yamaha frames choppered??? within the Yamaha TTR50 forums, part of the General Talk category; ok how is eavryones holdin up mines fine except i bent my subframe about 4 inches higher up on the left than the right side ...
Results 1 to 9 of 9
Thread: yamaha frames choppered???
-
07-27-2006, 11:49 PM #1Senior Member
This user has no status.
- Join Date
- Dec 2005
- Location
- Stratham, NH
- Posts
- 404
yamaha frames choppered???
TTR50, two brothers pro bar kit, HD springs front and back (.25" spacer), tall seat, Classic honda +2.5 swing arm, HD foot pegs, jet kit, air filter, tires(sudded,dirt,motard), custon front fender, blue hubs and black rims...etc
http://profile.myspace.com/index.cfm...endid=76229132
-
07-27-2006 11:49 PM
-
07-28-2006, 12:03 AM #2Senior Member
This user has no status.
- Join Date
- May 2005
- Location
- Texarkana
- Posts
- 1,789
nope, havent choppered mine yet, but i bent my seb frame about 2-3 inches down in the back, but thats the only thing ive bent, but i have shattered a rear wheel. Dont know much about the RB frame
T-RAV[quote name='anyonebut_24']Easy Money= Picking a trade while in high school, building experience while moving up the ranks, starting your own business and watching it take off while the money rolls in.
Bigshot= The guy that follows the above formula and gives you your minimum wage job sweeping the floors that he owns.[/QUOTE]
-
07-28-2006, 11:07 AM #3Senior Member
This user has no status.
- Join Date
- Jan 2004
- Location
- Kissimmee,FL
- Posts
- 5,896
Havent bent mine either yet.I went through a rear wheel,a set of forks breaking in half,and a swinger cracking but the frame is still good.
MotoHP
AHP Minis
-
07-28-2006, 06:11 PM #4Senior Member
This user has no status.
- Join Date
- May 2006
- Location
- SoCal
- Posts
- 1,392
ya ive went through the rear wheel, but my frame is still holding good
'06 KLX 110
-
07-28-2006, 06:57 PM #5Senior Member
This user has no status.
- Join Date
- Dec 2004
- Location
- Allen, TX.
- Posts
- 1,687
mines holding up fine.
-Andrew Clark-
- Rockstar Energy
- Classic Honda
- Paradise Air
- DC Shoes
- Answer Racing
- Scott Goggles
- Factory Backing
- Fiddylife.com
www.myspace.com/racerx336
www.putfile.com/racerx336
-
08-01-2006, 01:25 PM #6Senior Member
This user has no status.
- Join Date
- Jul 2006
- Location
- locust grove, va
- Posts
- 2,056
nothings yet i havent broken a single thing and mines all stock
-
08-29-2006, 09:27 PM #7Senior Member
This user has no status.
- Join Date
- Jul 2006
- Location
- locust grove, va
- Posts
- 2,056
ok well my frame is chopppered terribly unless its just me
-
09-11-2006, 03:02 PM #8Junior Member
This user has no status.
- Join Date
- Sep 2006
- Posts
- 4
frames
hey i have first hand expereince with the red baron. Beefy ass frame weighs about a pound more than stock but whoever did the r&d on the bearing races for the fork. Well the ttr50s just slop around in side the frame. I ride mine hard and I didnt want to ovalize the head tube, so I sent it back and bought a stock yami frame.... I WOULDNT SUGGEST THE RED BARON FRAME TO ANYONE. unless your gonna hang it on the wall and look at it. I hope no one does that...haha
-
09-11-2006, 04:26 PM #9Senior Member
This user has no status.
- Join Date
- May 2006
- Location
- SoCal
- Posts
- 1,392
oh thats good to know, i dont know of any other frames out there for the ttr50.
'06 KLX 110
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
