Yoshimura TM-MJN24 Carb

PlanetMinis Forums

Yoshimura TM-MJN24 Carb

This is a discussion on Yoshimura TM-MJN24 Carb within the Z50, CT70 and JDM Monkeybikes forums, part of the General Talk category; Has anyone on here run one of the "Yoshi" carbs yet and what's your experience? In comparison to the Mikuni's, what's different and which do ...

Page 1 of 8 123 ... LastLast
Results 1 to 15 of 117
Like Tree1Likes

Thread: Yoshimura TM-MJN24 Carb

  1. #1
    Senior Member
    This user has no status.
     
    HymieP's Avatar

    Join Date
    May 2008
    Location
    Norman, OK
    Posts
    533

    Yoshimura TM-MJN24 Carb

    Has anyone on here run one of the "Yoshi" carbs yet and what's your experience? In comparison to the Mikuni's, what's different and which do you prefer? Thanks

  2. #2
    Super Moderator
    is what mini?
     
    reynolds_brad's Avatar
    Supporting Member

    Join Date
    Dec 2003
    Location
    San Francisco, CA
    Posts
    2,974

    Re: Yoshimura TM-MJN24 Carb

    Hands Down the best damn carbs ive ever worked with.



    Im running a Yosh MJN-TM24 on my 95cc motor and a MJN-TM26 on my 115 ape.



    I posted a thread a while back with my experiences with them. I think TMAS has one of these carbs now as well.





    The MJN design places small holes along the sides of the hollow needle to atomize fuel at the center of the carburator throat which is the point of highest intake velocity. This provides improved throttle response and horsepower at low and mid-range rpm. Peak power is also higher because the main jet is allowed to flow more fuel with less restriction. The pilot circuit is stopped when the throttle is closed in order to prevent run-on which keeps the combustion chambers cleaner.



    the carb is also thermal transdusive coated inside and out to reduce heat.



    pecore nere ufficiose



    Hidden Content

  3. #3
    Senior Member
    This user has no status.
     
    p3racer's Avatar

    Join Date
    Sep 2003
    Location
    FLORIDA
    Posts
    6,382

    Re: Yoshimura TM-MJN24 Carb

    absolutly THE best performing carbs hands down. Easy to tune and make great power. I run a 24mm a 26mm and have a 24mm bored out to a 28mm and they all work perfect. Well worth the money.

  4. Remove Advertisements
    PlanetMinis.com
    Advertisements
     

  5. #4
    Senior Member
    is Trying to have alittle fun in
    life!
     
    Grafixxs's Avatar

    Join Date
    Apr 2007
    Location
    Marshall,MI
    Posts
    2,290

    Re: Yoshimura TM-MJN24 Carb

    So now the question is, where to get one of these carbs? I assume the 24mm will work great on a 88cc as well?

  6. #5
    Senior Member
    This user has no status.
     
    HymieP's Avatar

    Join Date
    May 2008
    Location
    Norman, OK
    Posts
    533

    Re: Yoshimura TM-MJN24 Carb

    Thanks, I think I'm going to go with the G-Craft intake with the swivel also. Pics would be great if you have them. Thanks

  7. #6
    Senior Member
    This user has no status.
     
    HymieP's Avatar

    Join Date
    May 2008
    Location
    Norman, OK
    Posts
    533

    Re: Yoshimura TM-MJN24 Carb

    They say they work great on anything over 88cc. I'm still learning everything I can about these, but so far, they sound like "the" carb to run. Easily tuned which is what I am after.

  8. #7
    Senior Member
    This user has no status.
     
    p3racer's Avatar

    Join Date
    Sep 2003
    Location
    FLORIDA
    Posts
    6,382

    Re: Yoshimura TM-MJN24 Carb

    Quote Originally Posted by Grafixxs
    So now the question is, where to get one of these carbs? I assume the 24mm will work great on a 88cc as well?
    MotoShopZ can get them I believe. Or Yoshimura

    sales@motoshopz.com

  9. #8
    Super Moderator
    is what mini?
     
    reynolds_brad's Avatar
    Supporting Member

    Join Date
    Dec 2003
    Location
    San Francisco, CA
    Posts
    2,974

    Re: Yoshimura TM-MJN24 Carb

    Quote Originally Posted by HymieP
    Thanks, I think I'm going to go with the G-Craft intake with the swivel also. Pics would be great if you have them. Thanks






    Here are two pics of the billet swivel intake.









    pecore nere ufficiose



    Hidden Content

  10. #9
    Senior Member
    This user has no status.
     
    cdoublejj's Avatar

    Join Date
    Oct 2008
    Location
    USA, MO
    Posts
    1,858

    Re: Yoshimura TM-MJN24 Carb

    i'v never seen a yoshi carb. can some one post pics.

  11. #10
    Senior Member
    This user has no status.
     
    bwise's Avatar

    Join Date
    Dec 2008
    Location
    Atlantic Beach, FL
    Posts
    153

    Re: Yoshimura TM-MJN24 Carb

    Quote Originally Posted by cdoublejj
    i'v never seen a yoshi carb. can some one post pics.




    its in the pics above your post.

  12. #11
    Senior Member
    This user has no status.
     
    muxster's Avatar

    Join Date
    Sep 2008
    Location
    Redondo Beach, Ca.
    Posts
    472

    Re: Yoshimura TM-MJN24 Carb

    Here...get the rad wallpaper from Yoshi...



    http://www.yoshimura-jp.com/en/produ...onkey_1280.jpg

  13. #12
    Banned
    This user has no status.
     
    HACKMUNCH's Avatar

    Join Date
    Apr 2006
    Location
    BRUNSWICK OHIO
    Posts
    5,144

    Re: Yoshimura TM-MJN24 Carb

    So those are just tm mikuni flat slides with different needles?

  14. #13
    Senior Member
    This user has no status.
     
    cdoublejj's Avatar

    Join Date
    Oct 2008
    Location
    USA, MO
    Posts
    1,858

    Re: Yoshimura TM-MJN24 Carb

    yeah a mikuni yoshi the on on top says mikuni Tm26 it doesn't say yoshi on it?????

  15. #14
    Senior Member
    This user has no status.
     
    shawnbassett26's Avatar

    Join Date
    Feb 2008
    Location
    Orlando FL
    Posts
    1,015

    Re: Yoshimura TM-MJN24 Carb

    Man that swivel is sweet.

    ~Shawn

  16. #15
    Senior Member
    is Cruisin'
     
    Adam z50+R's Avatar

    Join Date
    Sep 2008
    Location
    Nuneaton, England
    Posts
    569

    Re: Yoshimura TM-MJN24 Carb

    i was looking at these carbs also

    i currently use a mikuni vm28 flatslider on my honda nice motor

    (180cc daytona dohc)

    i was looking at this carb mjn tmr 28 flatslider its so trick!

    it also has an accelerator pump !?

    what benefit would i have with this



    cheers

    adam
    Attached Images Attached Images  

Page 1 of 8 123 ... LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

carburetor lc135
,
carburetor tm
,
carburetor yoshimura 135lc
,
kaberator yamaha lc
,
mikuni tm-mjn carburetor.jpg
,
tm mjn 28mm
,
yoshimura 26mm carb
,
yoshimura carb
,
yoshimura carbs
,

yoshimura carburetor

,
yoshimura crab lc135
,
yoshimura mikuni tm-mjn series
Click on a term to search for related topics.

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Sponsored Links

Powered by vBadvanced CMPS v4.3.0