Galespeed Type R 12" NSR Wheels - $1200

[s_10onbagz]

Well, I'm putting my galespeeds up for sale first and foremost. I am going to be selling off 90% of my minibike parts. I am keeping three bikes and almost no spare parts. These wheels have very little use, Justin bought them new and I bought them off him.

The wheels include the galespeed type r wheels, heidenau tires (110/90-12 front / 120/80-12 rear) which are basically new, cold fusion 35T rear sprocket, and all of the galespeed spacers for $1200. I will include the brembo caliper with g-craft bracket, aluminum banjo bolt, and braking front rotor for an extra $400.

[PlanetMinis.com]

[s_10onbagz]

I'll even do $1000 with no rotors and sprocket. Need these wheels gone.

[jordanxr]

What can i fit these on? I have a 1991 z50.

[--X--]

What can i fit these on? I have a 1991 z50.

Those would not fit a stock z50, if that's what you're thinking. They'd fit if you had a different swingarm and different forks, both of which would have to be set up to accept NSR50 wheels with disk brakes. Some of the guys on the forums have ZB50s set up for these, and a couple guys might have Z50s that could be set up for these... my motard would also work with these or my friend's Ape which has nsr wheels. I'd say about <10 guys on these forums could use these right now (outside the nsr crowd). Good luck with the sale though.

[s_10onbagz]

Xr50 front needs either nsr forks or z50 forks with a g-craft leg.
Xr50 rear needs different spacers and g-craft caliper bracket.

Z50 front needs a g-craft fork leg.
Z50 rear needs an aftermarket wide or nsr type swing arm with matching caliper bracket.

ZB50 needs nsr forks & g-craft caliper bracket(have both for sale as well).

Nsr is a bolt on affair.

[3-UP]

PM Sent .

[s_10onbagz]

I'll pm you back after work.

[s_10onbagz]

Anybody?

[3-UP]

I didn't get your PM

[s_10onbagz]

Oh man, I forgot. The braking rotors I have I will hold on to besides the front rotor that I'm selling with the brembo caliper setup.